DTSX1 sends a laser through a fiber optic cable and reads its reflection, measuring the temperature at every point along the cable at 1 meter intervals. This way, a single cable works like thousands of individual sensors, detecting the exact temperature value and precise location. If the fiber optic cable is damaged, it can be
The financial and operational losses caused by a fire in your facility can far exceed the cost of fire protection and prevention systems. A fire does not only threaten lives. It can cause serious damage to machinery and equipment. It can halt production and disrupt your operations for days or even weeks. Research shows that
Asynchronous motors draw a starting current far higher than their nominal current at the moment of start-up, approximately 8xIn. This sudden inrush current creates unwanted electrical and mechanical stress on the motor. Over time, this stress can damage the motor or shorten its service life. It can also lead to unexpected failures and unplanned downtime
Industrial facilities with Exproof zones carry specific safety requirements. Delayed or uncontrolled intervention in these areas can lead to serious safety risks and operational disruptions. Cedetaş offers Exproof button solutions designed in compliance with internationally recognized engineering and safety standards for use in hazardous areas. High ingress protection ratings provide resistance against dust and water,
Even millisecond time differences in power utilities can have critical consequences for grid safety, fault analysis, and system coordination. Accurate and uninterrupted time synchronization is therefore not just a technical requirement, it is one of the fundamental building blocks of operational continuity. Cedetaş Engineering & Technology combines MOBATIME time synchronization solutions with field experience to
Content of Interest
- 18/10/2021in Automation-Eng, Security
How to Design Electrical Plan
The whole of the plans, schemes and calculations prepared for the establishment of electrical facilities in accordance with modern technology in the areas designed to be built is called Electrical Project Design. Standard-specifications and regulations are the basis of the design. Each electrical design covers different systems depending on the pur... - 13/08/2025in Life Safety Systems - ENG
MobaTime NTP Solutions
What are NTP Time Servers and Slave Clocks? NTP time servers are network devices that distribute highly accurate time information to connected devices. The system operates on a hierarchical structure where time servers receive time from atomic clocks, GPS satellites, or other precision time sources, then distribute this time within their own enviro... - 21/01/2021in Automation-Eng, Security
Senstar Stellar Microwave Perimeter Security System
Izmir Elar company, which we work with in this project, is one of our regional solution partners. We have been informed that there were some security problems (which we could not disclose due to our confidentiality agreement) in the internationally operating facility in Manisa Organized Industrial Zone, where we have been supporting the ‘Noti... - 31/01/2022in Automation-Eng, Security
What Should Be Done Before Commissioning in Medium Voltage Soft Starters?
Before commissioning the Medium Voltage Softstarter, the following must be checked. Do Soft Starters have electrical projects? Have the Soft Starters been mechanically assembled? Are there compensation boards? Have they been mechanically assembled and wired? Have the motors been mechanically assembled? Is the coupling between the motor and the pump... - 08/04/2026in Security
Next Generation SIL Certified Warning Signals from E2S
Ensuring that an alarm device will operate when needed in hazardous areas is a fundamental requirement of safety systems. The E2S product range includes a new generation of SIL1 and SIL2 compliant warning devices that make this assurance a standard. SIL certificate is an international standard that defines the operational reliability of a safety de...
